Table of Contents
Advertisement
b. In the Protocol drop-down menu, select Kermit.
8. Click Send to initiate the transfer.
Assuming the transfer is successful:
If the transfer is not successful:
PTE-300 PosiTrack Ethernet Camera Controller
The program will display the message "Kermit File Sent To PTE300" once the transfer is
complete.
The PTE-300 will automatically reboot itself to initiate the new firmware.
The status LED on the PTE-300 will display a slow blink
In this case, check all connections and settings, and repeat the process.
Upgrading the Firmware
27
Advertisement
Table of Contents
