Telephone settings
Telephone base settings
Dial mode
The dial mode is preset to tone dialing. If you have pulse (rotary) service, you
must change the dial mode to pulse dialing before using the telephone.
To set the dial mode on the telephone base:
1. Press MENU/
main menu.
2. Use q/CID or p/DIR to scroll to >Settings, then
press
/SELECT.
MENU
3. Use q/CID or p/DIR to scroll to >Dial mode, then
press
/SELECT.
MENU
4. Use q/CID or p/DIR to scroll to >Tone or >Pulse,
then press
MENU
Press CANCEL to cancel.
Website
Use this feature to view the AT&T website address.
1. Press MENU/
main menu.
2. Use q/CID or p/DIR to scroll to >Website, then
/SELECT.
press
MENU
3. Press CANCEL to cancel.
in the idle mode to enter the
SELECT
/SELECT. There is a confirmation tone.
in idle mode to enter the
SELECT
29
Home area code
>Dial mode
DIAL MODE
>Tone
Website
>
-End of list-
www.telephones.
att.com