Default Settings; Switch 5500 Family - 3Com 5500-EI PWR Getting Started Manual

Default Settings

Table 5 shows the default settings for the Switch 5500 Family:
Table 5 Default Settings
Feature
Automatic IP Configuration
Port Status
Port Speed
Duplex Mode
Flow Control
Broadcast Storm Control
Virtual LANs (VLANs)
Management VLAN
Link Aggregation Control
Protocol (LACP)
IP Multicast Filtering
Rapid Spanning Tree Protocol Enabled
Fast Start
RMON Alarm
Webcache Support
Traffic Prioritization
Port Security
Configuration Save and
Restore
Switch 5500
Enabled
Enabled
Auto-negotiated
Auto-negotiated
Auto-negotiated
Enabled
All ports belong to the untagged Default VLAN
(VLAN 1) with IEEE Std 802.1Q-1998 learning
operational
Fixed as VLAN 1 on 5500-SI units. Can be any
VLAN for 5500-EI units.
Disabled per port
Filtering enabled
Enabled on front panel ports
Enabled
Disabled
All ports prioritize NBX VoIP traffic (LAN and IP).
All ports set to "best effort" for all other traffic.
Disabled per port
Disabled
Default Settings 19