Preparing For Management - 3Com 5500-EI PWR Getting Started Manual

34 C 3: S
HAPTER ETTING
Preparing for
Management
U M
P FOR ANAGEMENT
For a detailed description of how automatic IP configuration operates,
please refer to the Configuration Guide on the CD-ROM that
accompanies your Switch or the 3Com Web Site.
You should use the automatic IP configuration method if:
your network uses DHCP to allocate IP information, or
■
flexibility is needed. If the Switch is deployed onto a different subnet,
■
it will automatically reconfigure itself with an appropriate IP address,
instead of you having to manually reconfigure the Switch.
If the Switch is not allocated with an automatic IP addresss, the IP
configuration will be blank or shown as ''''.
If you use the automatic IP configuration method, you need to discover
the automatically allocated IP information before you can begin
management. Work through the
Information" section on
Once your Switch's initial set up is complete you can set up your chosen
management method as described in
on page 30.
For detailed information about the specific web interface operations and
command line interface commands and problem solving, refer to the
"SuperStack 4 Switch Command Reference Guide" on the CD-ROM that
is supplied with the Switch or on the 3Com Web site.
"Viewing Automatically Configured IP
page 41.
"Methods of Managing a Switch"