3Com 5500-EI PWR Getting Started Manual page 70

70 C 6: U
HAPTER PGRADING
S
OFTWARE
(where aaa.aaa.aaa.aaa is the IP address of the TFTP server)
s4a indicates the Switch filename, see
Table 15 Switch 5500 Filenames
Filename Prefix
s4a
s4b
s4e
2 To download the Web user interface file, enter:
tftp aaa.aaa.aaa.aaa get http.zip
3 To download the default configuration file, enter:
tftp aaa.aaa.aaa.aaa get 3ComOScfg.def
4 To download the bootrom file, enter:
tftp aaa.aaa.aaa.aaa get s4e002_012_000.btm
The bootrom firmware may not require upgrading for every software
upgrade, therefore there may not be a new bootrom (.btm) file to
download.
File Distribution
The following commands enable you to distribute your downloaded files
to the remaining Switches in the fabric:
1 To copy the new software file to each Switch in the fabric, enter:
copy unit1>flash:/s4a03_01_00s168.app unit2>flash:/
Replace unit2 with unit3 and so on for each Switch in the fabric.
2 To copy the new default configuration file to each Switch in the fabric,
enter:
copy unit1>flash:/3ComOScfg.def unit2>flash:/
Replace unit2 with unit3 and so on for each Switch in the fabric.
3 To copy the new Web user interface file to each Switch in the fabric,
enter:
copy unit1>flash:/http.zip unit2>flash:/
Replace unit2 with unit3 and so on for each Switch in the fabric.
4 To copy the new Bootrom firmware file to each Switch in the fabric,
enter:
Table 15
SuperStack 4 Switch 5500-SI software
SuperStack 4 Switch 5500-EI software
SuperStack 4 Switch 5500 bootrom software
for further details:
Switch