Dell PowerEdge 7250 User Manual page 81

Table C-5. Boot Option Parameters
Parameter Number
BMC boot flag 3
valid bit clearing
(semi-volatile)
(continued)
Parameter Data (non-volatile unless otherwise noted)
Data 1 - BMC boot flag valid bit clearing. Default = 0000b.
[7:5] - Reserved.
[4] - 1b = Do not clear valid bit on reset/power cycle caused by
PEF.
[3] - 1b = Do not automatically clear boot flag valid bit if IPMI
Chassis Control command not received within 60-second time-out
(countdown restarts when a IPMI Chassis Control command is
received).
[2] - 1b = Do not clear valid bit on reset/power cycle caused by
watchdog timeout.
[1] - 1b = Do not clear valid bit on pushbutton reset / soft-reset
(for example, <Ctrl>-<Alt>-<Del>).
[0] - 1b = Do not clear valid bit on power up via power pushbutton
or wake event.
Terminal Mode Commands
79