Subcommands
status — Displays the current power status of the system, the returned value is "on" or "off".
on — Turns on the managed system.
off — Issues a "graceful shutdown" IPMI command.
NOTE:
The off subcommand is not supported on the PowerEdge 7250. You must use the force option to
turn off the system.
cycle — Turns off the system, pauses, then turns the system back on.
reset — Pulses the system reset signal, regardless of the power state.
Options
-force
This option simulates pressing the power button, forcing the system to turn off without shutting
down the operating system.
Default Subcommand
If a subcommand is not specified, this command acts the same as power status.
Figure 3-7. power Option Example
39
BMC Management Utility