Table of Contents
Advertisement
Installation
To install the BMC Management Utility on the management station, perform the following steps:
Log on with administrator privileges to the system where you want to install the system
1
management software components.
Exit any open application programs and disable any virus-scanning software.
2
Insert the Systems Management and Documentation CD into your system's CD drive.
3
The setup program should start automatically. If it does not, click the Start button, click Run,
and then type x:autorun.exe (where x is the drive letter of your CD drive).
Click Install BMC Management Utilities.
4
Click OK.
5
Click Open to proceed through the installation process and respond to the prompts, as
6
required.
The setup program automatically installs all of the management station software for your
hardware configuration.
When the installation is complete, close the installation window.
7
See the for more information.
See the Dell OpenManage™ Version 1.8.3 User's Guide for additional information about installing
the BMC Management Utility on a management station.
Windows Operating Systems
By default, the installation program copies the files to the following directory:
C:\ProgramFiles\ Dell\OpenManage\bmcconsole.
Uninstalling the BMC Management Utility
To uninstall the BMC Management Utility, use the Add/Remove Programs utility in the Control
Panel.
Red Hat Linux Operating Systems
By default, the installation program copies the files to the following locations:
/etc/init.d/solproxy
/etc/solproxy.cfg
/usr/sbin/solproxyd
/usr/bin/solconfig
/usr/bin/ipmish
BMC Management Utility
29
Advertisement
Table of Contents
