Hp_Powerredundancyset; Hp_Memberofpowerredundancy - HP Integrity rx7620 Datasheet

HP_PowerRedundancySet

4-3-3
HP_PowerRedundancySet is used to model power supply redundancy sets on Integrity servers. The
Windows implementation class is HP_WinPowerRedundancySet.
Table 4-4
Class: HP_PowerRedundancySet
Property name
CIM_ManagedElement
Caption
Description
ElementName
CIM_SystemSpecificCollection
InstanceID
CIM_RedundancySet
MaxNumberSupported
MinNumberNeeded
TypeOfSet
LoadBalanceAlgorithm
RedundancyStatus

HP_MemberOfPowerRedundancy

4-3-4
HP_MemberOfPowerRedundancy is used to represent an association between HP_PowerSupply and
HP_PowerRedundancySet. The Windows implementation class is
HP_WinMemberOfPowerRedundancy.
Property implementation
Power Redundancy Set n, where n represents the
number of the redundancy set instance
Power Redundancy Set n is collection of fault tolerant
power supplies that provide redundant power.
n represents the number of the redundancy set instance
Power Redundancy Set n, where n represents the
number of the redundancy set instance
Unique identifier for this power redundancy instance
The maximum number of power supplies supported for
this redundancy set
The minimum number of power supplies needed to
function
3 (Load Balanced)
0 (Unknown)
•
0 (Unknown) – if the redundancy status is unknown
•
2 (Fully Redundant) – if the all power supplies in
the set are operating properly and enough to
achieve redundancy
•
3 (Degraded Redundancy) – if there are at least
enough power supplies for the redundancy set to
provide power, but power supplies have failed
•
4 (Redundancy Lost) – if there are not enough
power supplies required to achieve redundancy,
but there are enough for the redundancy set to
provide power
•
5 (Overall Failure) – if there are not enough power
supplies operating properly for the redundancy set
to provide power.
3BSystem Power Supply 46