HPSAS_DAPort represents the front-end port for an HBA in the host system. Direct Attached implies
that the array controller is attached to a local bus on the host (for example, PCI).
Table 15-11
Property name
CIM_ManagedElement
ElementName
CIM_ManagedSystemElement
OperationalStatus[0]
CIM_LogicalElement
CIM_EnabledLogicalElement
EnabledDefault
EnabledState
RequestedState
CIM_LogicalDevice
CreationClassName
DeviceID
SystemCreationClassName
SystemName
CIM_LogicalPort
UsageRestriction
CIM_DAPort
HPSAS_DAPort
HPSAS_Firmware
15-3-11
HPSAS_Firmware represents the firmware installed on a SAS HBA controller.
Table 15-12
Property name
CIM_ManagedElement
ElementName
CIM_ManagedSystemElement
Class: HPSAS_DAPort (CIM_DAPort)
Class: HPSAS_Firmware (CIM_SoftwareIdentity)
Property implementation
Controller name and location, for example, HP 8 INT
Port SAS/SATA HBA in Slot 3
Port status
•
0 (Unknown)
•
2 (OK)
•
6 (Error)
2 (Enabled)
5 (Not Applicable)
12 (Not Applicable)
HPSAS_DAPort
Opaque key
HPSAS_ArraySystem
HPSAS_ArraySystem.Name
2 (Front-End Only)
Property implementation
TargetType value
Set to HPQ:HBA FW UNKNOWN
14BSAS HBA 282