Hp_Etheventsettings - HP Integrity rx7620 Datasheet

Table 12-23
Property name
Key: PhysicalLocation
HP_ElementLocation
HP_WinElementLocation

HP_EthEventSettings

12-3-23
HP_EthEventSettings models configurable Ethernet Indication settings. The Windows implementation
class is HP_WinEthEventSettings.
Table 12-24
Property name
CIM_SettingData
Caption
Description
ElementName
Key:InstanceId
HP_EthEventSettings
HP_WinEthEventSettings
ActiveAdapterCountChanged
FloodThreshold
InterfaceAvailable
InterfaceUnAvailable
MaxFloodLevel
MemberJoinedTeam
MemberLeftTeam
MemberRoleChanged
MemberStatusChanged
Class: HP_ElementLocation
Class: HP+EthEventSettings
Property implementation
ref:HP_Location
Property implementation
HP Ethernet Event Provider configurable settings for
Windows
HP Ethernet Event Provider configurable settings for
Windows
HP Ethernet Event Provider configurable settings for
Windows
0
If enabled, an event is generated when a change is
detected in number of active adapter count of a team.
Default, disabled.
Time, in seconds, used for indication flood control,
default 10 seconds
If enabled, an event is generated when a network
interface becomes available. Default, disabled.
If enabled, an event is generated when a network
interface becomes unavailable. Default, disabled.
Max number of events within Flood Threshold, default
If enabled, an event is generated when an adapter
joins a team. Default, disabled.
If enabled, an event is generated when an adapter
leaves a team. Default, disabled.
If enabled, an event is generated when any change in
team member role is detected. Default, disabled.
If enabled, an event is generated when any change in
team member status is detected. Default, disabled.
11BEthernet Teaming 128