Appendix C Installation Specifications - Fujitsu PA03541-B105 Operator's Manual

Appendix C
Installation Specifications
The following table summarizes the installation specifications of the ScanSnap.
Dimensions
(Note)
Weight
Input power
supply
Power
consumption
Temperature/
Humidity
Allowable
Ranges
Item
Width
Minimum (when paper 284 mm
chute is closed) 11.18 in.
Maximum (when 284 mm
paper chute is opened 11.18 in.
and paper chute guide
is extended)
1.4 kg (approximately 3.08 lb)
Voltage for power 100 - 240 V (varies regionally)
cable connection
Voltage for USB bus 5 V (Your computer must have two USB ports; one for
power cable power feeding, and the other for USB cable
connection connection.)
Number of phases Single-phase
Frequency 50/60 Hz
Power cable During operation: 9.0 W or less
connection During standby: 3.2 W or less
USB bus power cable During operation: 5.0 W or less
connection During standby: 2.0 W or less
ScanSnap state During
operation
Temperature 5 to 35 (°C)
41 to 95 (°F)
Humidity (%) 20-80
ScanSnap S300M Operator's Guide
Specifications
Depth Height
95 mm 77 mm
3.8 in. 3.08 in.
227 mm 240 mm
9.27 in. 9.80 in.
During standby During storage/
transportation
-20 to 60 (°C) -20 to 60 (°C)
-4 to140 (°F) -4 to 140 (°F)
8-95 8-95
C
199