Fujitsu PA03541-B105 Operator's Manual page 203

4. Attach the new Pad ASSY while pushing the pad plate down.
Pad plate
5. Make sure that the Pad ASSY is completely locked into the hooks on the ADF.
Make sure that the Pad ASSY is completely attached. Otherwise,
ATTENTION
document jams or other feeding errors may occur.
6. Close the ADF.
ADF
⇒
You should hear the ADF click when it returns to its original position.
Pad ASSY
Hooks
ScanSnap S300M Operator's Guide
9.2 Replacing the Pad ASSY
ADF
ADF
Pad ASSY
Paper
chute
9
183