Scanning Business Cards - Fujitsu PA03541-B105 Operator's Manual

•
The following settings are recommended.
HINT
−
−
•
The scanning of business cards can be also prepared by selecting
"Cardiris" in the "Select a Profile" window which pops up when the
ScanSnap Manager icon is clicked.
4. Click the [Apply] button.
5. Click the close button
⇒
The "ScanSnap Manager - Scan and Save Settings" window is closed.
<Scanning business cards>
Operation
1. Load the document onto the ScanSnap and press the [SCAN] button
• Load the business cards face down.
• When scanning more than one business card, set them together.
• Adjust the side guides so that they are touching the edges of the business card.
Hold the tags of the side guides when moving them.
⇒
Scanning is started.
⇒
When scanning is complete, Cardiris window appears.
[Scanning] tab: [Color mode] set to "Color", [Image quality] set to "Best"
[Compression] tab: [Compression rate] set to "1".
in the upper left corner of the window to close the window.
ScanSnap S300M Operator's Guide
6.1 Using ScanSnap Manager
Paper chute
Business card
Side guide
[SCAN] button
.
6
159