Fujitsu PA03541-B105 Operator's Manual page 208

6. Remove the pick roller from its shaft.
Pull out the shaft from the pick roller while lifting up its tab.
ATTENTION
7. Attach a new pick roller to the shaft.
Insert the shaft aligning the protrusion with the slot on the new pick roller.
188
Shaft
If you push up the pick roller tab using your fingernail, your fingernail
may be hurt or get chipped. If you cannot push it up successfully with
your fingernail, you can use a paper clip to push up the pick roller tab.
Shaft
Tab
Protrusion
Pick roller
Pick roller