About Maintenance - Fujitsu PA03338-B005 - FI-5750C Image Scanner Getting Started Manual

ScandAll 21 Image Capturing Utility Software,
FUJITSU ISIS scanner driver, QuickScan
image capturing software and Adobe Acrobat.

About Maintenance

The user must not perform repairs on this
scanner.
Contact the store where you purchased the
scanner or an authorized FUJITSU Image
Scanner service provider to make repairs to this
product.
■ Safety Precautions
WARNING
The following describes important warnings
described in this manual.
Do not touch the AC cable with wet
hands.
Do not touch the power plug
with wet hands. Doing so might
cause electric shock.
Do not damage the AC cable.
A damaged AC cable may cause
fire or electric shock.
Do not place heavy objects on
AC cables, or pull, bend, twist,
heat, damage or modify AC
cables.
Also, do not use damaged AC
cables or power plugs, and AC
cables or power plugs when the
wall socket is loose.
Use only specified AC cables and
connector cables
Use only specified AC cables
and connector cables. Failure to
use the correct cables might
cause electric shock and
equipment failure.
Use this scanner only at the indicated
™
power voltage. Do not connect to
multiple-power strips.
Wipe any dust from the power plug.
Do not install in locations subject to
oil smoke, steam, humidity, and dust.
Do not use the scanner if you smell
strange odor.
Turn the scanner OFF if it is
damaged.
Use this scanner only at the indi-
cated power voltage and cur-
rent. Improper power voltage
and current might cause fire or
electric shock.
Also, do not connect to multiple-
power strips.
Wipe off any dust from metal
parts on the power plug or metal
fittings with a soft, dry cloth.
Accumulated dust might cause
fire or electric shock.
Do not install the scanner in
locations subject to oil smoke,
steam, humidity, and dust. Doing
so might cause a fire or electric
shock.
If you detect heat coming from
the device or detect other prob-
lems such as smoke, strange
smells or noises, immediately
turn off the scanner and then dis-
connect its power plug.
Make sure that the smoking has
stopped, and then contact the
store where you bought the
scanner or an authorized
FUJITSU scanner service
provider.
If the scanner is damaged for any
reason, turn off the scanner and
unplug the power cable before
contacting the store where you
purchased the scanner.
v