Fujitsu PA03338-B005 - FI-5750C Image Scanner Getting Started Manual page 26

Installing QuickScan
Pro(Trial)
"QuickScan Pro" is an imaging software that
complies with the ISIS standards. With the
FUJITSU ISIS scanner driver you can capture
scanned image data read with the scanner.
When using Windows NT 4.0, Windows
2000 and/or Windows XP, please login
ATTENTION
as a user with "Administrator" privileges
(privileges of the administrator of your
PC).
1.
Insert the Setup CD-ROM into the CD
drive.
The <SETUP DISK STARTUP SCREEN>
will be displayed.
2.
Click [Install Products].
3.
Click the [QuickScan PRO (trial)]
button in the following screen.
2-10
4.
Install the application following the
instructions on the window.
5.
Input the requested information and
click on the [Next] button.
QuickScan Pro, attached to the Setup
CD-ROM is a trial version. Therefore,
ATTENTION
there is a limitation of 30 program starts.
Purchasing this software is necessary if
you intent to use this software unlimited.
(when installing and using the trial
version, please use the displayed serial
number. For the operations of
QuickScan, please refer to the "Overview
of QuickScan" or the "QuickScan Help".
Please click [Start], [Program], and then
[QuickScan] in turn, and select then the
file to refer.
6.
Install the application following the
instructions on the window.
Confirming the installation
Please confirm if the scanner operates correctly
with the following procedure.