Fujitsu PA03338-B005 - FI-5750C Image Scanner Getting Started Manual page 27

1.
Load the documents on the scanner.
For loading documents, please refer to
Chapter 2 "BASIC SCANNER
OPERATIONS" of the "fi-5750C Operator's
Guide".
2.
Start QuickScan Pro.
Please select [Start], [Programs],
[QuickScan] in turn, then click on
[QuickScan].
3.
Select [Scan], and [Select
Scanner...] from the menu bar.
Select Fujitsu fi-5750C, then click the [OK]
button.
4.
Select [Preview Setting...] from the
[Scan] menu. Set the reading
resolution and document size, then
click [OK].
5.
Select [Preview Scan] from the [Scan]
menu to start the scanning-
If the scanning is completed without any
troubles, the installation was performed
successfully.
Refer to "QuickScan Overview" or "Quick -
Scan Help" for information about Quick -
HINT
TM
Scan functions and operations. On the
[Start] menu, point to [Programs] - [Quick -
Scan] and click the file.
2.3.3 Installing other application
programs
Installing Error Recovery
Guide
If you did not install the Error recovery guide
together with the driver, please follow the
below given procedure for installing it
separately.
When Error Recovery Guide is installed on
your PC, it displays troubleshooting informa-
tion on screen if any scanner error occurred.
1.
Insert the Setup CD-ROM in your CD
drive.
The <SETUP DISK STARTUP SCREEN>
will be displayed.
2-11