Fujitsu PA03338-B005 - FI-5750C Image Scanner Getting Started Manual page 37

Locations and Cycle for Cleaning
Part to Clean
Flat Bed Document Holding Pad
Document Bed
ADF Chute Roller
Pick Arm
Pick Roller Set
Brake Roller
Feed Rollers
Plastic Rollers
Sheet Guide
Glass
Ultra Sonic Sensor
For details on the cleaning the ADF, refer to Chapter 4 "DAILY CARE OF THE EQUIPMENT" of
the "fi-5750C Operator Guide".
The scanner must be cleaned more frequently if you scan any of the following type of documents.
ATTENTION
•
Documents of coated paper.
•
Documents that are almost completely covered with printed text or graphics.
• Chemically treated documents such as carbonless paper
•
Documents containing a large amount of calcium carbonate
•
Handwritten documents
TABLE 5.
Standard Cleaning
Cycle using Cleaner
F1
Clean these parts
after every 10,000
scans.
Clean this part with a dry lint-free dry cloth.
Standard Cleaning
Cycle using Cleaning
Paper with Cleaner F1
Clean these parts
after every 10,000
scans.
Standard Cleaning
Cycle using Cleaner
F2
Clean these parts
when dirty.
AP-7