Using The Universal Remote Control; Keys And Functions - Philips SRP2003 User Manual

4
•
5
3 U sing the universal
3.1
The illustration on page 2 gives an overview of
all keys on the remote control. Try out the keys
you need for operating your devices.
1
2
3
P2003_27__Manual_80_210.indd 9
Pressandhold the key that does not
function and immediately release it when
the device responds.
If the key still does not function as expected,
try pressing it again for a longer period of
time.
Press the
selection key twice
to save your settings
and exit setup
mode.
• W hen no key
is pressed for 5 minutes or more, the
remote control will exit setup mode,
automatically saving all your settings.
remote control
Keys and functions
Notes
•
Keys having the same functions as the
keys on your original remote control may
have different namings on the SRP2003
(e.g. Info / Display).
•
Only functions that are available on your
original remote control can be used for
operating your devices with the SRP2003.
.................................... Setup light.
............................... selects available source
.................. device selection keys.
device
2 x
• lights up red when the
remote control is in
setup mode.
• lights up red when
a remote control
command is being sent.
inputs (antenna, cable,
etc.).
Select the device to be
operated.
EN
9
25-09-09 11:0