Setting Up The Universal Remote Control - Philips SRP2003 User Manual

3
•  I fthedevicedoesnotrespondatallor
2.3
This is only necessary if your device does not
respond to the SRP2003. If that is the case, the
SRP2003 does not recognize the brand and / or
model of your device and you need to set up
the remote control to do so.
The example below instructs you how to do this
for your TV. You can repeat the same steps for
other devices (DVD player/recorder and Cable/
Satellite box) which you want to operate, using
the SRP2003.
The remote control can be set up to operate
any 3 of the following devices:
Device name
TV
DVD
P2003_27__Manual_80_210.indd 5
Check whether the
keys that you need
for operating your
TV are working. For
an overview of the
keys and their
functions see chapter 3.1.
• If the TV responds as it should to all
of the key commands, the SRP2003 is
ready for use.
nottoallofthekeycommands,  followthe
instructionsinchapter2.3.
S etting up the universal remote
control
Description
Traditional TV, flat screen
TV and projection TV, TV
part of TV / VCR, TV / VCR
/ DVD and TV / DVD
combos
DVD player / recorder
(DVDR), DVD / Hard
Disk Drive combination
(DVDR-HDD), Blu-Ray
player, High Definition
DVD player (HD-DVD),
DVD part of TV / DVD, TV
/ VCR / DVD and VCR /
DVD combos
EN
5
25-09-09 11:0