Getting Started; Inserting The Batteries; Testing The Universal Remote Control - Philips SRP5004/53 User Manual

2
2.1
•
When replacing the batteries, all user settings will be
retained in the remote control memory for an unlimited
period of time.
2.2
It is advised to test whether your device(s) already
respond(s) to the SRP5004 before setting it up (see chapter
2.3). The example below instructs you how to do this for
your TV. You can repeat the same steps for other devices
(STB, DVD player/recorder and VCR) which you want to
operate using the SRP5004.
Example: testing the universal remote control on your TV:
1
2
•
3
• If the device does not respond at all or not to all of the key
4
SRP5004_53_Manual_DEF.indd 4

Getting started

Inserting the batteries

Insert 2 AAA type batteries,
noting the + and -
configuration in the battery
compartment.
Note

Testing the universal remote control

Turn ON your TV manually or use the original remote
control for this. Tune to channel 1.
Press the device
selection key to select TV.
• The key lights up.
If the key does not light up,
check whether the batteries
are properly inserted
(see chapter 2.1).
Check whether the keys
that you need for operating
your TV are working. For an
overview of the keys and
their functions see
chapter 3.1.
• If the TV responds as it
should to all of the key commands, the SRP5004 is
ready for use.
commands, follow the instructions in chapter 2.3.
EN
01-06-09 12:49