8
9
3.2
If an improved key (see chapter 2.3.2) still does
not function as expected, you can always reset
the key to its original function.
1
2
3
P2003_27__Manual_80_210.indd 11
................................ switches the selected
Note
For some TV brands / types, this key will only
turn off the TV. You will have to press a digit
button (direct channel selection) to turn on
the TV again.
R esetting a key to its original
function
In the current
device mode, keep
digit keys
pressed
simultaneouslyfor5
seconds, until the
red Setup light
•
The remote control is now in setup
mode.
Press digit keys
, and
order.
•
After each key
press the red
Setup light
blinks once.
Press the key you
wish to reset twice.
E.g. the 22 key.
•
After each key
press the red
Setup light
blinks once.
•
The red Setup light
more time to confirm that the key was
succesfully reset to its original function.
............ digit keys for direct
channel / track selection.
device on / off.
5 sec.
and
lights up.
,
, in that
will blink one
2 x
EN
11
25-09-09 11:0