Philips SRP2003 User Manual page 7

5
•
6
•
2.3.1 S etting up the remote control for
1
2
P2003_27__Manual_80_210.indd 7
Switch ON the TV.
Try out the keys
you need for
operating it. Try, for
example, if the - CH
+ and digit keys
function properly.
If a key does not work as expected, press
andhold that key. Release it immediatelyas
soon as it works. For more information, see
chapter 2.3.2.
Press the
device selection key
twice to finish setup.
• W hen no key
is pressed for
5 minutes or
more, the remote control will exit setup
mode, automatically saving all your
settings.
Important
If you made a mistake:
Press the device selection key twice to exit
•
setup. The red Setup light
• Restart from the beginning.
 I fthedevicedoesnotrespondatallornotto
allofthekeycommandsorifyoucannotfind
thecodeforyourbrand,  enter'9,  9,  9,  9'  instep
3andcontinuewithstep4.  Theremotecontrol
willnowsearchitsfulldatabaseforacode
thatworkswithyourTV.  Fulldatabasesearch
maytakeupto15minutes.
other devices (DVD player/recorder
and Cable/Satellite box)
M ake sure the device is turned on, fully
operational and able to respond to remote
control commands. E.g. insert a disc in the
DVD player / recorder or a video cassette in
the VCR.
Then follow steps 2 to 6 of 'Setting up the
remote control for your TV'. Make sure to
use the correct device selection key:
.
2 x
turns off.
EN
or
7
25-09-09 11:0