Philips SRP2003 User Manual page 13

How do I set the remote control for my TV /
DVD combo?
Some combo devices require you to set up
two different source selection keys to control
both parts of the combo device. If you have a
TV / DVD combo, you might need to set up
the remote control for both TV and DVD to
operate your TV / DVD combo.
The remote control does not wake up
anymore.
Battery level too low or battery lifetime came
to an end.
•
The device I want to operate does not respond
at all / does not respond to all of the key
commands.
•
•
Wrong code selected during setup.
•
It may be that the keys that you are trying to use
have a different naming on the original remote
control.
•
Will my settings be deleted when I replace the
batteries?
No. All user settings will be retained in the
remote control memory in the remote control
memory for 5 minutes.
P2003_27__Manual_80_210.indd 13
Operation
Replace the batteries. See chapter 2.1.
Check if the keys you press are available on
the original remote control of the device.
Try improving keys. See chapter 2.3.2.
Set up the remote control again for the
device. Always test if the device responds,
before leaving setup mode.
See chapter 2.2.
Try out all keys to find the one(s) you need.
Batteries
EN
13
25-09-09 11:0