Resetting A Button To Its Original Function - Philips SRP2002/10 User Manual

5
............... p revious/next channel.
.................. a djust TV volume.
6 ............................... wide screen (TV).
7 ................................. c onfirms your selection.
8 . ..... d igit buttons for direct channel/track
selection.
9 . .............................. f or extra functions. When pressed at
the same time as a second key, the
second key will get another function.
For example:
+ . ............... menu on/off.
+ . ............ menu up.
+ ............ menu down.
+ .............. menu right.
+ . ............. menu left.
T ry out other combinations with the
device in order to find out which functions are available.
Only functions featured on the original remote control
are available.
10
. .............................. s elects between one and two-figure
channel numbers and channel
numbers with more than two or
three figures.
11 . .................... teletext on (
12 ................................. rewind.
............................... p lay.
................................. f ast forward
................................. s top.
................................. record.
................................ pause.
EN
8
key on your
)/off ( ).
3.2 R esetting a button to its original function
If an improved button (see chapter 2.2.2.) still does not
function as expected, you can always reset the button to its
original function.
1
I n the current device
mode, keep digit buttons
and pressed
simultaneously for 5 seconds,
until the green Setup light
lights up.
• T he remote control is now in setup mode.
2
P ress digit buttons ,
and , in that order.
• A fter each button press
the green Setup light
blinks once.
3
P ress the button that you
wish to reset twice.
E.g. the button.
• A fter each button press
the green Setup light
blinks once.
• T he green Setup light will blink one more time to
confirm that the button was succesfully reset to its
original function.
5 sec.
2 x
EN
9