R Esetting A Button To Its Original Function - Philips SRP2006/55 User Manual

A , B, C, D . .................
C ontext sensitive buttons,
ordered following the
requirements for cable
boxes.
A - Yellow, B - Blue, C - Red,
D - Green.
5
+ VOL - . ..................... adjusts TV volume.
................................ mutes TV sound.
................................ p revious program / Last /
Back.
+ CH - ....................... n ext / previous channel.
6
5 . ................................. r ewind.
2 . ................................... p lay.
6 . ................................. f ast forward.
9 . ................................... s top.
0 ................................... record.
; . .................................... p ause.
4 P 3P . ....................... p revious (4P) / next
(3P) page / track in
various modes.
/ ....................... set your Thumb ratings.
7 . ............................... u sed after direct channel
selection. Some devices
require ENTER to be
pressed after channel
selection.
.......................... s elects between one
and two-figure channel
numbers.
8
. ........... d igit buttons for direct
channel / track selection.
9 . ............................... s witches the selected
device on / off.
Note
For some TV brands / types, the
will only turn off the TV. You will have to
press a digit button (direct channel selection)
to turn on the TV again.
10 EN
button
3.2 R esetting a button to its
original function
If an improved button (see chapter 2.2.2) still
does not function as expected, you can always
reset the button to its original function.
1
I n the current
device mode, keep
digit buttons
and pressed
simultaneously for 5
seconds, until the
red Setup light lights up.
• T he remote control is now in setup mode.
2
P ress digit buttons
, , and , in
that order.
• A fter each
button press
the red Setup
light blinks once.
3
P ress the button
that you wish to
reset twice. E.g. the
22 button.
• A fter each
button press
the red Setup light blinks once.
• T he red Setup light will blink one
more time to confirm that the button
was succesfully reset to its original
function.
5 sec.
2 x
EN 11