Advertisement
There will be three items to configure thru the "LAN Board" menu option through the "Options 2" Menu.
1.) The first option to be configured is "IP Address Set" When that option is selected, the following
menu will appear.
NOTE: The fields following "IP Address Set" will be blank if the LAN Card is used for first time.
NOTE: The IP Address used is an example ONLY . This information is obtained through the IT / MIS
Department.
L:\tekcentr\CACTrain\SPS_ntwk
1.) IP Address Set
2.) Gateway Set
3.) Subnet Mask
(For Example Only)
6
10/16/2001
Advertisement
