Sharp XG-V10WLP Network Configuration Manual page 12

Figure 6
Under the "Projector" item select the proper projector XG-V10W / XU / M. Finally place
a check in the "Use Projector" box.
After confirming / adjusting the "Projector Setting" menu the "Apply" button will become active
(Not ghosted) click the "apply" button and then the "OK" button and your projector's ID number
and the port idendified will appear under the "All Projector List".(Refer to Figure 7)
Figure 7
12 10/16/2001
L:\tekcentr\CACTrain\SPS_ntwk