Advertisement
2.) The next item to configure is the "E-mail Address Book" These addresses are the e-mail
address's for who ever is going to receive "Projector Condition" (sending periodic e-mail messages
on projector status) and "Projector Error" e-mail messages (Notifying that errors have occurred)
Individuals can be within the corporate network or have access to email. (Refer to Figure 12)
Figure 12
NOTE: Email address must be entire address even if individual is local. (Refer to Figure 12)
3.) One of the major advantages of using the SAPS software with the Networked V10 is
status and diagnostics of the projector(s).
The E-mail function e-mails your projector failure problems while also giving the E-mail recipients
an overall status report. The Status report timing, when E-mail is sent out and what faults
or projector errors will be E-mailed immediately. (Refer to Figure 13)
Figure 13
15
10/16/2001
L:\tekcentr\CACTrain\SPS_ntwk
Advertisement
