Advertisement
Projector Menu SetUp for the AN-L10T Optional Expansion Board
The following "Projector Menu" functions need to be set in order to configure the projector
to be used with the AN-L10T LAN card.
1.) To Setup the ID Number, proceed to the Projector menu "Options 2" and toggle down to the
Set ID Number using the down arrow button on the projector.
The example we are using is ID # 11 as indicated above
2.) When the LAN board is installed, select Menu Button "OPTIONS 2" from the
menu screen. "LAN BOARD" will appear for the option board setting.
L:\tekcentr\CACTrain\SPS_ntwk
1.) ID Number Setup
2.) Optional Board (LAN Board) Setup
5
10/16/2001
Advertisement
