Advertisement
If the network scan was successful the following window will appear on the "Multiple Control"
screen under the "All projector List". (Refer to Figure 17)
Figure 17)
The green circle and the information indicated informs the SAPS administrator the unit is on
and communicating. Please refer to the SAPS software manual for further information on
these fields.
If the projector is not detected with the scan setting the following screen will appear
under the "All projector List". (Refer to Figure 18)
Figure 18
At this point verify connection and "S.A.P.S." menu options and contact your IT / MIS
department for assistance or Call 1-888 GO-Sharp (1-888-467-4277) Option 2.
18
10/16/2001
L:\tekcentr\CACTrain\SPS_ntwk
Advertisement
