Units; Language Preference; Pdl (Page Description Language); Pdl Options - Kyocera FS-3040MFP User Manual

Device Settings

Units

Selecting a Unit of Measurement
1
2

Language Preference

Setting Language Preference
1
2

PDL (Page Description Language)

PDL Options

2-11
You can set Inches or Millimeters as the unit of measurement. This is used for
the following settings:
Custom page size setting in the Page Sizes dialog box in the Basic tab.
Spacing setting in the Watermark Add and Edit dialog boxes in the
Advanced tab.
Poster settings and Gutter settings in the Layout tab.
You can select a unit for displaying measurements in the user interface.
In Device Settings > User Settings, select Inches or Millimeters.
Click OK in the User Settings and Properties dialog boxes.
The Language preference option specifies the user interface language of
Device Settings in Properties and all tabs of Printing Preferences.
Available languages vary depending on your locale and your computer settings.
You can select a user interface language.
In Device Settings > User Settings, select the desired language from the
Select language list.
Click OK in the User Settings and Properties dialog boxes.
A Page Description Language (PDL) specifies the contents and layout of a
printed page. In Device Settings, you can choose from PCL XL, (Printer
Command Language XL), PCL 5e, KPDL (an emulation of PostScript printing),
or PDF (Portable Document Format). The printer default is PCL XL, which is
suitable for most printing purposes. When using the XPS driver in Windows 7
and Windows Vista, PCL XL is the only PDL selection. After you select a PDL,
the selection appears in the lower corner of the Preview image.
In GDI compatible mode, vector graphics are rasterized for printing as bitmap
images. Use the GDI compatible mode option to improve the output quality of
the graphic created by the application.
Note: To add PDF to the list of PDL choices, you must install the Output to
PDF plug-in.
In a client/server environment, this feature is unavailable to a client logged in as
a restricted user.
The PDL options, available in the PDL Settings dialog box, are accessed in
Device Settings.
User Guide