Editing A Prologue/Epilogue File; Deleting A Prologue/Epilogue File; Assigning A Prologue/Epilogue File; Unassigning A Prologue/Epilogue File - Kyocera FS-3040MFP User Manual

Editing a Prologue/Epilogue File

1
2
3

Deleting a Prologue/Epilogue File

1
2

Assigning a Prologue/Epilogue File

1
2

Unassigning a Prologue/Epilogue File

1
2
KX DRIVER
browse for files on your computer or network to add to the list.) After the file is
selected, insertion point options become available.
You can edit a Prologue/Epilogue file on your system.
In Advanced > Prologue/Epilogue , select a command file name from the list,
and then click Edit. Notepad opens for editing the text file.
Make your changes to the file.
Save the file, and exit Microsoft Notepad.
Note: Editing and saving a command file replaces the contents of the existing
local or network file.
You can remove a Prologue/Epilogue file from the list.
In Advanced > Prologue/Epilogue , select a Prologue/Epilogue file name
from the list, and then click Delete.
In the delete confirmation box, click Yes to accept.
Note: Only the file name is removed from the command file list. The file itself
is not deleted, but remains on the network or local computer.
You can insert a Prologue/Epilogue file into a print job.
In Advanced > Prologue/Epilogue, select a Prologue/Epilogue file name
from the list.
Under Insertion Point, select a place to insert the Prologue/Epilogue file.
If you designate a Prologue/Epilogue file as unassigned, you are removing it
from the print job. It remains in the list. Unassigned selections are useful when
the list contains several Prologue/Epilogue files, and you want to use some but
not others.
In Advanced > Prologue/Epilogue, select a Prologue/Epilogue file name
from the list.
Under Insertion Point, select Unassigned.
Advanced
8-2