Device Options; Setting Device Options; Auto Configure; Enabling Auto Configuration - Kyocera FS-3040MFP User Manual

3
4

Device Options

Setting Device Options

1
2

Auto Configure

Enabling Auto Configuration

1
KX DRIVER
Click Printer properties (Windows 7) or Properties (Windows Vista, Windows
XP).
Click Device Settings.
Optional devices extend the capabilities of your printing system for source.
In a client/server environment, this feature is unavailable to a client logged in as
a restricted user.
You can set the printer driver to match the optional devices installed on your
printing system.
In the Properties dialog box, click Device Settings.
In Device Settings > Device options, select the check boxes for all installed
devices.
Auto Configure detects the devices installed on the printing system if it is
connected over a network. Auto Configure can detect printing system devices
such as input devices. When your computer is connected to the printing system
through a TCP/IP or WSD port, the Auto Configure button appears in Device
Settings. Auto Configure updates the Device options list, Memory, and
preview images to keep the printer driver consistent with the printing system
configuration.
Not all installed devices are detected by using Auto Configure. Before
selecting OK in Device Settings, check the settings to make sure that they are
correct.
Note: The default setting for Windows XP Service Pack 2 is for the Windows
Firewall to be set to On. The setting can be changed to allow communication
between the printing system and your computer. In the Windows Security
Alert dialog box, click Unblock.
Silent Auto Configuration
Silent auto configuration checks the printing system every 10 minutes for
changes in optional devices or memory. When a change is detected, the driver
is automatically updated with the new settings. Silent auto configuration is
only available for printing systems installed in Windows 7 or Windows Vista.
In a client/server environment, this feature is unavailable to a client logged in as
a restricted user.
The Auto Configure button can be used to detect all available device options
when the printing system is connected to a network through a TCP/IP port.
Verify that all optional devices are attached to the printing system, and that it is
turned on and ready to print.
Device Settings
2-2