Harness Height - DJG Enspira Instruction Manual

4358-3432E Enspira 5pt 8/6/07
4
5
6
7
12
4:46 PM Page 15
Press on harness retainer
release button and pull
apart.
Press red button on
buckle to release the
buckle plates. Place
harness over sides of child
restraint.
Lift headrest to the highest
position by pulling headrest
out while sliding up. This
will expose all harness
slots.
Place the child's bottom
and back flat against the
child restraint.This will
increase comfort and allow
the harness to properly
tighten.
Determine which of the
8
three available buckle slots
is both comfortable and
snug. Refer to "Removal
of Harness" to adjust
buckle.
1
NOTE:
2
1st and 2nd crotch strap
slots rear-facing. The 3rd
3
slot is for forward-facing
only.
Check Harness Height
9
Harness
Rear-Facing Position:
Guide
Harness guide must be
even with or just below
the shoulders.
Forward-Facing
Position: Harness guide
must be
just above the shoulders.
If the harness guide is below the child's shoulders in
the highest
harness location and the child weighs at least 40 lbs.
(18.1 kg) and is over 1 year old, convert the seat to a
belt-positioning booster.
For Models With A Body Pillow
Determine which set of
10
harness guide slots works
best for your child. Adjust if
needed.
13
You must use the
even with or
continued on next page.