DJG Enspira Instruction Manual page 10

4358-3432E Enspira 5pt 8/6/07
11A
12A
13A
16
4:46 PM Page 19
To change harness
location:
From the back of the seat,
remove harness from
splitter plate.
Pull harness through the
harness slots from the
front.
Rethread harness into
new harness slot location.
Make sure harness does
not twist.
Refasten harness to
14A
splitter plate. Make sure
harness does not twist.
WARNING
!
Failure to reattach the harness correctly,
can result in serious injury or death.
Lower headrest so slots in
15A
shell match slots in
headrest. Thread harness
straps into headrest pad.
Place child in child
restraint.
Harness Covers (on select models)
Harness covers help
provide comfort to the
neck. For harness covers
to fit correctly, you may
have to fit the upper ends
of the covers through the
harness slots. To remove
the harness covers,
unthread the harness from
splitter plate (see
"Removal of Harness"
section). Slide covers off
harness and refasten
harness to splitter plate.
17