DJG Enspira Instruction Manual page 9

4358-3432E Enspira 5pt 8/6/07
11
12
13
14
14
4:46 PM Page 17
To change harness
location:
From the back of the seat,
remove harness from
splitter plate.
Pull harness through the
harness guides from the
front.
From back of child
restraint, remove harness
guides by pushing down on
one edge with one hand
and pulling out from the
front side with the other.
Snap in the optional
harness guides with body
pillow into the new
harness slots.
Rethread harness into
15
new harness guide
location. Make sure
harness does not twist.
Refasten harness to
16
splitter plate. Make sure
harness does not twist.
WARNING
!
Failure to reattach the harness correctly,
can result in serious injury or death.
Position headrest behind
17
the child's head.
NOTE:
positioned above the
harness straps.
For Models Without A Body Pillow
Lift the bottom of headrest
10A
to determine which set of
harness guide slots works
best for your child. Adjust
if needed.
15
Headrest must be
continued on next page.