Ordering and replacing supplies
Ordering and replacing supplies
Ordering ink cartridges
1
Licensed for a single use only. After use, return this cartridge to Lexmark for remanufacturing, refilling, or
recycling.
2
Available only on the Lexmark Web site at www.lexmark.com.
Notes:
•
To get more ink, order high‑yield ink cartridges.
•
Depending on your country or region, you may get the ink cartridges individually or in packs.
•
You can order a mix of standard ink cartridges and high‑yield ink cartridges, depending on your
needs.
•
For page yield information, visit www.lexmark.com/yields.
•
The cartridges used for printing documents can also be used for printing photos.
•
For best results, use only genuine Lexmark ink cartridges.
Replacing ink cartridges
Make sure you have a new ink cartridge or cartridges before you begin. You must install new cartridges
immediately after removing the old ones, or the ink remaining in the printhead nozzles may dry out.
1
Turn on your printer.
2
Open the ink cartridge access door.
Warning—Potential Damage: Do not extend the ink cartridge access door beyond 90 degrees
when opening to prevent it from breaking.
3
Press the release tab, and then remove the used ink cartridge or cartridges.
4
Install each ink cartridge.
Note: Install the new ink cartridges immediately after removing them from the packaging to avoid
exposing the ink to air.
SD/ MS/
xD/ MM
C
2
1
S D /M
S /x D
/M M C
17