Recalling A Program Destination - Konica Minolta bizhub 36 User Manual

6.1 Operation flow
Press Start.
Reference
- This machine cannot automatically detect the size of an original document that will be scanned. Before
scanning the document, specify its size. If the size of the original document is not correctly specified,
some parts of the image may be lost. For details on specifying the size of an original document, refer
to page 6-25.
- If the memory becomes full while the document is being scanned, scanning cannot continue. To send
the document pages that have already been scanned, press Start. To stop the transmission, press
[Cancel].
6.1.3

Recalling a program destination

The following describes the procedure to use the program destination.
Press [Fax] in the home screen or
Fax on the Control Panel.
Press Mode Memory.
Select a program destination, and press [OK].
bizhub 42/36
6
6-5