Direct Input; Fax - Konica Minolta bizhub 36 User Manual

6.4

Direct Input

6.4 Direct Input
Directly enter to specify the destination not registered.
Reference
- If [Admin Settings] ö [Security Settings] ö [Security Details] ö [Manual Destination Input] is set to [Re-
strict], an address cannot be directly typed in.
d
Reference
For details on the Manual Destination Input, refer to the [User's Guide Administrator Operations].
6.4.1

Fax

Enter the fax number by using the Keypad or the panel buttons.
Reference
- [Tone]: Press to send push-button tones when pulse dialing is being used. [T] appears in the screen.
- [Pause]: Press to insert a pause when dialing. [P] appears in the screen.
- [-]: Press to insert a dash as a separator symbol while dialing. This has no effect on the dialing.
After you press [OK], the screen to enter the fax number appears again if [Admin Settings] ö [Fax Settings]
ö [Fax Function Settings] ö [Cofirm Addr (TX)] is set to [ON]. Enter the fax number, and then press [OK].
bizhub 42/36
6
6-11