Pop Before Smtp; [E-Mail Rx (Pop)] - Konica Minolta bizhub 223 User Manual

4.3 Sending scanned data by E-mail
4.3.5

POP before SMTP

[POP before SMTP]
In the administrator mode of PageScope Web Connection, select [Network] ö [E-mail Setting] ö [E-mail
TX (SMTP)].
Item
[POP before
SMTP]
[POP Before SMTP
Time]

[E-mail RX (POP)]

In the administrator mode of PageScope Web Connection, select [Network] ö [E-mail Setting] ö [E-mail
RX (POP)].
Item
[E-mail RX Setting]
[POP Server Ad-
dress]
[Login Name]
bizhub 423/363/283/223
Description
Select [ON] to perform POP before SMTP authentication.
Enter the period from a time you log in to the POP server
to a time you access the SMTP server.
If the POP and SMTP servers are in different computers, it
will take time to notify the SMTP server that you have
logged in to the POP server. Therefore, if a too short time
is specified, sending of E-mails may fail.
Description
Select [ON] to perform POP before SMTP authentication.
Enter the POP server address.
Format: *.*.*.* (Asterisk * can be 0 to 255)
If the DNS server has already been configured, you can
enter the host name instead.
When using IPv6, you can specify the IPv6 address.
Enter the login name of the POP server (up to 63 charac-
ters).
4
Prior check
Is POP before SMTP
authentication re-
quested by the serv-
er?
Are the POP and
SMTP servers in dif-
ferent computers?
Prior check
Server address
4-13