Linking An Openapi System With This Machine; Tcp/Ip Settings] - Konica Minolta bizhub 223 User Manual

9.2

Linking an OpenAPI system with this machine

9.2 Linking an OpenAPI system with this machine
Configure the OpenAPI settings of this machine.
These settings are required when you want to link an OpenAPI system with this machine.
If you have registered the device certificate on this machine and if you use this machine as a communication
server, you can encrypt OpenAPI communications from the client to this machine using SSL. Also, this ma-
chine can request the OpenAPI client for a submission of the client certificate. When the client connects to
this machine, the submitted client certificate is verified and the client can be authenticated.
When this machine communicates as a client and when the certificate is submitted by the server, this ma-
chine can verify the submitted certificate.
If the OpenAPI connection application supports the SSDP function, you can notify the application that the
OpenAPI service has started on this machine by using the SSDP function of this machine. If the OpenAPI
service is searched by the SSDP function in the application, a response will be returned when this machine
satisfies relevant search conditions.
Use the following flowchart to configure settings. Clicking a step jumps to the associated procedure.
Reference
- If you use PageScope Authentication Manager for authentication, configure the OpenAPI setting to
use SSL/TLS. (Linking with PageScope Authentication Manager is available only when a Hard Disk
is installed. )
9.2.1

[TCP/IP Settings]

Configure settings to use this machine in the TCP/IP network environment.
For details, refer to page 2-2.
bizhub 423/363/283/223
[TCP/IP Settings]
[SSDP Settings]
Do you use SSL communica-
tion?
Yes
[Device Certificate Setting]
[OpenAPI Setting]
Do you validate the certificate?
Yes
Certificate validation
Finish
No
No
9
9-4