Using Extension Lines; [Multi Line Settings] - Konica Minolta bizhub 223 User Manual

14.8

Using extension lines

14.8 Using extension lines
If two Fax Kit FK-508 are installed, configure settings for the second line.

[Multi Line Settings]

In the administrator mode of PageScope Web Connection, select [Fax Settings] ö [Multi Line Settings].
Item
[Line Parameter Set-
ting]
[Dialing Method]
[Number of RX Call
Rings]
[Line Monitor Sound]
[Function Setting]
[PC-FAX TX Setting]
[Number Display Func-
tion]
[Name Display Func-
tion]
[Multi Line Usage Set-
ting]
[Line 2 Setting]
[Sender Fax No.]
bizhub 423/363/283/223
Description
Configure line parameters for the extension line.
Select a dialing method for the extension line.
Specify the number of quasi-ring back tone count between fax arrival and the
start of reception.
Specify whether to hear the line sound from the speaker during communica-
tion.
Configure settings for the extension line function.
Select the line used for PC-FAX transmission.
This item is not available.
This item is not available.
Configure the operation settings of Line 2 (an extension line).
Specify the communication method for Line 2 (an extension line).
You can specify [TX Only], [RX Only], or [TX and RX] for an extension line.
Enter the fax ID (up to 20 characters, including + and space).
Usually enter the fax number of the fax machine.
The registered fax number is printed as the sender information on the fax re-
ceived by the recipient.
14
14-19