5.2
Print (SMB)
5.2
Print (SMB)
Configure settings for SMB printing.
A printer can be shared on the Windows network using the SMB protocol. The SMB printing allows a com-
puter to directly specify this machine running on the Windows network to print information.
To use SMB printing in the IPv6 environment, you must enable the direct hosting service.
To perform the SMB printing from a computer with Windows Vista/Server 2008/7 installed, you can perform
the name resolution using the LLMNR function even if DNS server is not present. To perform the name res-
olution especially in the IPv6-only communication environment under Windows Vista/Server 2008/7, it will be
convenient to enable the LLMNR function.
Use the following flowchart to configure settings. Clicking a step jumps to the associated procedure.
Do you use the WINS server?
[WINS Setting]
d
Reference
For details on how to install the printer driver, refer to the [User's Guide [Print Operations]].
5.2.1
[TCP/IP Settings]
Configure settings to use this machine in the TCP/IP network environment.
For details, refer to page 2-2.
bizhub 423/363/283/223
No
Yes
No
[TCP/IP Settings]
[Print Setting]
IPv6 environment?
No
Do you send data to
Windows Vista/Server
2008/7?
Yes
[LLMNR Setting]
Finish
5
Yes
[Direct Hosting Setting]
5-4