Certificate Validation; [Certificate Verification Level Settings] - Konica Minolta bizhub 223 User Manual

9.2 Linking an OpenAPI system with this machine
9.2.5

Certificate validation

[Certificate Verification Level Settings]

In the administrator mode of PageScope Web Connection, select [Network] ö [OpenAPI Settings].
Item
[Certificate Verifi-
cation Level Set-
tings]
[Client Certificate]
[Validity Period]
[CN]
[Key Usage]
[Chain]
[Expiration Date
Confirmation]
bizhub 423/363/283/223
Description
To verify the certificate, configure settings to verify the
certificate.
Specify whether to request for client certificates.
If you authenticate the client by requesting for its certifi-
cate (verification of client certificate), select [Request].
Select whether to check that the target certificate is within
the validity period.
Select whether to check that the CN of the certificate
matches the server address.
Select whether to check that the certificate key is being
used properly.
Select whether to check that the certificate chain (certifi-
cation path) is correct.
The chain is validated by referencing the external certifi-
cates managed on this machine. For details, refer to
page 8-34.
Select whether to check the target certificate for valida-
tion.
The OCSP service and CRL (Certificate Revocation List)
are checked in this order when the expiration date of the
certificate is checked.
9
Prior check
Do you request for
client certificates?
9-7