[Certificate Verification Setting] - Konica Minolta bizhub 223 User Manual

4.3 Sending scanned data by E-mail
Item
[Certificate Verifi-
cation Level Set-
tings]
[Validity Period]
[CN]
[Key Usage]
[Chain]
[Expiration Date
Confirmation]

[Certificate Verification Setting]

In the administrator mode of PageScope Web Connection, select [Security] ö [Certificate Verification Set-
ting].
Item
[Certificate Verifi-
cation Setting]
[Timeout]
[OCSP Service]
[URL]
bizhub 423/363/283/223
Description
To verify the server certificate, configure settings to verify
the certificate.
Select whether to check that the server certificate is within
the validity period.
Select whether to check that the CN of the server certifi-
cate matches the server address.
Select whether to check that the server certificate is used
according to the purpose approved by the issuer.
Select whether to check that the server certificate chain
(certification path) is correct.
The chain is validated by referencing the external certifi-
cates managed on this machine. For details, refer to
page 8-34.
Select whether to check that the server certificate is within
the validity period.
The OCSP service and CRL (Certificate Revocation List)
are checked in this order when the expiration date of the
certificate is checked.
Description
Select [ON] to verify the server certificate.
Enter a timeout period for expiration date confirmation.
Select this check box to use the OCSP service.
Enter the URL of the OCSP service (up to 511 characters).
If this item is left blank, the machine accesses the URL of
the OCSP service embedded in the certificate. If the URL
of the OCSP service is not embedded in the certificate, an
error will occur.
4
Prior check
Prior check
Do you confirm the
expiration date?
4-11