Table of Contents
Advertisement
6
Enter the GPRS network access code: *99# in the Phone number field, then click Next.
Important: You may need to click the Dialing tab and modify the way Pocket PC dials to connect to the GPRS network. For
more information on dialing patterns, consult your handheld device's documentation.
7
Tap Wait for dialtone to deselect this option, then tap Finish.
Your new dialing configuration is now visible in the Modem Connections list.
Use your new GPRS modem connection
To connect to your Internet service provider or corporate network:
1
Tap the Start icon
, then tap Programs.
2
Tap Connections, then tap your new modem connection (example: Internet-GPRS).
3
Verify that the GPRS access number is displayed correctly, then click Connect.
When you have successfully logged on to the network, the Pocket PC's status screen will
show the message Device Connected.
4
Launch your browser or e-mail application.
Before you make a digital data call
Before initiating the data call from your Pocket PC device, make sure you enable infrared
communications on your phone, then align the infrared ports of the two devices.
Please also see "Requirements for digital data calls" on page 1.
• CONFIGURE A MODEM CONNECTION-CSD
The procedure for creating a new modem connection for use with your Nokia phone is similar to that found in the various Windows
desktop operating systems. However, before you can configure your PocketPC for a CSD data call, you need to obtain the required
setup information from your ISP or corporate network's Helpdesk.
Important: You may need to first disable your Pocket PC's option that automatically begins synchronization when an
infrared connection is detected. For more information on this task, please consult your device's user guide.
Connect to Microsoft PocketPCTM OS (operating system) devices
[ 39 ]
11
Advertisement
Table of Contents
