Auto Cleaning - Samsung SR8895 Instrukcja Obs?Ugi

Operating the cleaner
USING THE ROBOTIC VACUUM CLEANER

AUTO CLEANING

The robotic vacuum cleaner will move by itself and
automatically clean the house until cleaning is completed
once.
If cleaning begins when the robotic vacuum cleaner is docked with
the charger station, the time to return to the charger is decreased
since the robotic vacuum cleaner remembers its original position
while moving.
If the battery level becomes too low while cleaning, the robotic
vacuum cleaner will automatically return to the charger station and resume cleaning after
charging its battery. (Number of cleaning operations resumed : Once)
Main unit button
1time
About the Resume Cleaning function
●
If the robotic vacuum cleaner has evaluated that cleaning is
NOTE
complete, the resume cleaning function is not performed.
●
If you move the robotic vacuum cleaner when it is being
charged or press a button, the robotic vacuum cleaner
judges cleaning to be complete and does not resume
cleaning.
●
Do not move the robotic vacuum cleaner when it is cleaning
or press a button while it is cleaning. Otherwise, the robotic
CAUTION
vacuum cleaner judges cleaning to be complete and starts
cleaning again from the beginning.
●
When you press the Turbo remote control button, either On
turbo (
the display panel in turns. When On turbo is displayed, you
can clean the fl oor in Turbo Mode.
●
When you press the Edge remote control button, On Edge
(
display panel in turns. When On Edge is displayed, you can
clean the fl oor in Edge Mode.
●
If you select both Turbo Mode and Edge Mode at the same
time, the (
turns.
30_ Operating the cleaner
Remote control button
) or Off turbo (
) or Off Edge (
) is display on the display panel in
Configuration Sequence
1
Set the mode.
2
Cancel the mode.
) is displayed on
) is displayed on the
Normal Mode
Turbo Mode
Edge Mode
Cleaning Complete