1. Manuals
  2. Brands
  3. Samsung Manuals
  4. Vacuum Cleaner
  5. SR8895
  6. User manual

Samsung SR8895 User Manual (XP) User Manual

Robotic vacuum cleaner
Hide thumbs Also See for SR8895 User Manual (XP):
Table of Contents

Advertisement

Quick Links

See also: User Manual
Robotic Vacuum Cleaner
✻ Before operating this unit, please read the instructions carefully.
✻ For indoor use only.
User Manual
imagine
the possibilities
Thank you for purchasing a Samsung product.
To receive a more complete service,
please register your product at
www.samsung.com/register
SR8895
English

Advertisement

Table of Contents
loading

Related Manuals for Samsung SR8895 User Manual (XP)

Summary of Contents for Samsung SR8895 User Manual (XP)

  • Page 1 Robotic Vacuum Cleaner ✻ Before operating this unit, please read the instructions carefully. ✻ For indoor use only. imagine Thank you for purchasing a Samsung product. To receive a more complete service, please register your product at www.samsung.com/register User Manual...
  • Page 2 SAFETY INFORMATION • Before operating the appliance, please read this manual thoroughly and retain it for your reference. WARNING • Because these following operating instructions cover various models, the characteristics of your vacuum cleaner may differ slightly from those described WARNING in this manual.

  • Page 3: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should be observed, including the following: READ ALL INSTRUCTIONS BEFORE USING YOUR ROBOTIC VACUUM CLEANER. Unplug from outlet when not in use and before conducting maintenance. WARNING: to reduce the risk of fire, electric shock, or injury: GENERAL •...

  • Page 4: Save These Instructions

    ROBOTIC VACUUM CLEANER • Do not pick up hard or sharp objects such as glass, nails, screws, coins, and etc. • Do not use without a filter in place. When servicing the unit, never put fingers or other objects into the fan chamber in case the unit accidentally turns on. •...

  • Page 5: Table Of Contents

    SAFETY INFORMATION PROdUCT FEATURES ASSEMBLING THE CLEANER OPERATING THE CLEANER MAINTAIN TOOLS ANd FILTER TROUBLESHOOTING PROdUCT SPECIFICATION 06 Power related 07 Before use 10 In use Cleaning and maintenance 13 Product Features 15 Components 16 Name of each part 20 Installing robotic vacuum cleaner 20 Installation order 20 Turning the power switch on or off 21 Installing the charger...

  • Page 6: Safety Information

    POWER RELATEd do not bend the power cord forcefully or place a heavy object on it that could break it. WARNING - This may result in fire or electric shock. Make sure to remove any dust or water from the power plug.
  • Page 7 Safety information BEFORE USE Before activating the robotic vacuum cleaner, make sure that the dust bin is assembled. CAUTION - If the dust bin is not inserted, robotic vacuum cleaner will not operate. Never use robotic vacuum cleaner in locations with combustible material such as.

  • Page 8: Before Use

    BEFORE USE Remove small objects or brittle items from the area to be cleaned in advance. CAUTION - Make sure to clear any objects before cleaning. - Make sure to remove fragile items such as china, glass objects, flowerpots, etc. - Robotic vacuum cleaner does not recognize coins, rings or other valuable items such as jewelry.
  • Page 9 Safety information BEFORE USE Install the charger in a location that can be easily accessed by the robotic vacuum cleaner. CAUTION - If the charger is installed in a corner, this may cause extra movements and may disturb the automatic recharging process. Objects in front of the charger will prevent the robotic vacuum cleaner from auto-charging itself.

  • Page 10: In Use

    IN USE You cannot use the robotic vacuum cleaner on thick carpets. - This may result in problems with the robotic vacuum cleaner. CAUTION - This may result in damage to carpets. do not use the robotic vacuum cleaner on a table or other high locations.
  • Page 11 Safety information IN USE Robotic vacuum cleaner cannot completely clean locations that it cannot reach, such as corners, and spaces between sofas NOTE and walls. - Please clean these locations occasionally. dust clusters may remain after cleaning, when the robotic vacuum cleaner fails to pick up dust clusters that were formed while cleaning.

  • Page 12: Cleaning And Maintenance

    After cleaning, wash the mop and dry it completely before using it again. WARNING - Failing to do so may result in bad odors. Contact the Samsung Electronics customer care center to replace the battery. WARNING - Failing to use original batteries will result in product failure.

  • Page 13: Product Features _13

    CONVENIENT VIRTUAL GUARd FUNCTION You can confine the robotic vacuum cleaner to a particular section by using the Fence (virtual wall) mode or by cleaning several sections one by one using the Guard (virtual door) mode. dELICATE CLEANING OF EVERY CORNER Since the robotic vacuum cleaner cleans the floor in a sequential way ( determined by the ceiling shape recognition function, it cleans every corner of the floor.
  • Page 14 AUTO CHARGING EdGE-CLEANING SIdE ROTATING BRUSH dOORSILL CROSSING About 1.5cm Stair type ANTI-CRASH ANTI-FALLING SAFETY dEVICE 14_ Product Features When the battery is low, the robotic vacuum cleaner is automatically guided to the charger to enable it to perform a quick auto charge.

  • Page 15: Assembling The Cleaner

    Assembling the cleaner COMPONENTS Others Components ■ (AAA-Type Batteries) User Manual / VIRTUALGUARD 2 Battery Remote Control Microfiber Mop Cradle Main Body ■ Remote Control ■ Charger (Station) ■ Spare Filter Cleaning Brush Mop Plate Assembling the cleaner _15...

  • Page 16: Name Of Each Part

    NAME OF EACH PART Dust Outlet Operating Button Camera Obstacle Sensor Dust Bin Eject Button Dust Bin Dust Outlet Cliff Sensor Side Brush Charge Pin Cliff Sensor Charge Pin Roller Cliff Sensor 16_ Assembling the cleaner [ Main unit ] Front Side Bottom...

  • Page 17: Installing The Batteries

    Assembling the cleaner NAME OF EACH PART Charging Lamp Charge Pin Mode Lamp Distance Detection Sensor Installing the batteries ■ Batteries are not supplied with the product. You have to purchase the batteries separately. Install the alkaline batteries (type D) before use. Lift the cover of the VIRTUAL GUARD while pressing the locking tab.

  • Page 18: Remote Control

    NAME OF EACH PART Power Directional Buttons (moving backwards is not supported.) Manual Turbo Installing the Remote Control Batterise ■ Batteries are not installed in the remote control when purchasing the product. Install the batteries (type AAA) before use. Lift the battery compartment cover at the back of the remote control, while pressing...
  • Page 19 Assembling the cleaner NAME OF EACH PART [ display panel ] dISPLAY PART 1. Number display - Shows the timer display, progress status, and error codes using numbers, letters and graphics. 2. Battery Level Indicator - Charging : Shows the charging progress in 3 steps. - In Use : Shows the battery charge level.

  • Page 20: Operating The Cleaner

    INSTALLING THE ROBOTIC VACUUM CLEANER INSTALATION ORDER 1. Turning the Power Switch on or off To use the robotic vacuum cleaner, you must turn on the Power Switch at the bottom of the main unit. 2. Installing the Charger To charge the robotic vacuum cleaner, you must first install the charger.

  • Page 21: Installing The Charger

    Operating the cleaner INSTALLING THE ROBOTIC VACUUM CLEANER INSTALLING THE CHARGER Power Lamp 1. Install the charger on a flat surface. 2. There should be no obstacles 0.5m to the left and right and within 1 m of the front. 3.

  • Page 22: Charging

    INSTALLING THE ROBOTIC VACUUM CLEANER CHARGING When the product is initially purchased, the battery is fully discharged, and you must charge the robotic vacuum cleaner manually. 1. After aligning the charge pins of the main unit with the charge pin of the charger station, press the main unit until you hear a “Recharging power”...

  • Page 23: About The Battery

    ( model number before purchasing it. - This battery is only for Samsung robotic vacuums. It is strictly prohibited to use it for other appliances or for other purposes. - Do not disassemble or modify the battery.

  • Page 24: Setting The Time

    INSTALLING THE ROBOTIC VACUUM CLEANER SETTING THE TIME To use the Scheduled Cleaning and daily Cleaning functions properly, setting the time is necessary. You can only set the time using the remote control. You can only set the time using the remote control. ■...

  • Page 25: Installing The Virtual Guard

    Operating the cleaner INSTALLING THE ROBOTIC VACUUM CLEANER INSTALLING ThE VIRTUAL GUARD You can confine the robotic vacuum cleaner to a particular section by using Fence (virtual wall) mode or clean several sections one by one using Guard (virtual door) mode. Forming a Fence (virtual wall) VIRTUAL GUARD creates an invisible barrier that the robotic vacuum cleaner cannot cross.

  • Page 26: Power Button

    In this case, replace the batteries. (Specifications: Type D (LR20) alkaline batteries ) • You can additionally purchase a VIRTUAL GUARD from Samsung Electronics customer care Co., Ltd. About the IrdA sensor. ● The infrared signal transmission may...

  • Page 27: Attaching A Mop

    Operating the cleaner USING THE ROBOTIC VACUUM CLEANER ATTAChING A MOP You can effectively remove dust with the microfiber mop. Mop attachment procedures 1. Attach the mop to the Velcro fastener of the mop plate. - Attach the mop making sure that the mop attachment line is not covered.

  • Page 28: Using Robotic Vacuum Cleaner

    USING THE ROBOTIC VACUUM CLEANER STARTING/STOPPING CLEANING You can run or stop all robotic vacuum functions. Each robotic vacuum function only runs when the Power ■ Switch is turned on. When the robotic vacuum is operating, press the ( ■ button to cancel the operation and select a function.

  • Page 29: Recharging

    Operating the cleaner USING THE ROBOTIC VACUUM CLEANER RECHARGING You can have the robotic vacuum cleaner return to the charger to charge the battery by using the Recharging button. When the robotic vacuum cleaner is operating, press ■ the ( ) button to cancel the operation and press the Recharging button.

  • Page 30: Auto Cleaning

    USING THE ROBOTIC VACUUM CLEANER AUTO CLEANING The robotic vacuum cleaner will move by itself and automatically clean the house until cleaning is completed once. If cleaning begins when the robotic vacuum cleaner is docked with ■ the charger station, the time to return to the charger is decreased since the robotic vacuum cleaner remembers its original position while moving.

  • Page 31: Spot Cleaning

    Operating the cleaner USING THE ROBOTIC VACUUM CLEANER SPOT CLEANING You can conveniently clean a specific area that has a a lot of cookie crumbs, dust, and etc. Move the robotic vacuum cleaner to the location where you ■ want to perform a spot clean. Main unit button ▶...

  • Page 32: Max Cleaning

    USING THE ROBOTIC VACUUM CLEANER MAx CLEANING The robotic vacuum cleaner automatically moves and cleans until the battery runs out and the battery level flashes only one level. If cleaning begins when the robotic vacuum cleaner is docked ■ with the charger station, the time to return to the charger is decreased since the robotic vacuum cleaner remembers its original position while moving.

  • Page 33: Manual Cleaning

    Operating the cleaner USING THE ROBOTIC VACUUM CLEANER MANUAL CLEANING You can move the robotic vacuum cleaner to clean a particular location directly by using the remote control. Move the robotic vacuum cleaner to the location where you want ■ to perform manual cleaning.

  • Page 34: Scheduled Cleaning

    USING THE ROBOTIC VACUUM CLEANER SCHEDULED CLEANING You can schedule robotic vacuum cleaner to start cleaning from a particular time. Scheduled cleaning is only performed when robotic ■ vacuum cleaner is docked with the charger station. Main unit button When completing the settings, and you press the ( Daily button, Scheduled Cleaning mode is exited.

  • Page 35: Setting Daily Cleaning

    Operating the cleaner USING THE ROBOTIC VACUUM CLEANER SETTING DAILY CLEANING You can schedule the cleaning robot to start cleaning everyday from a particular time. Daily cleaning is only performed when the cleaning robot ■ is docked with the charger station. Main unit button Remote control button Second...

  • Page 36: Using Additional Functions (Turbo Mode, Edge Mode)

    USING ADDITIONAL FUNCTIONS You can use the cleaning robot more easily and conveniently using various additional functions. You can only configure the additional functions with the remote control. ■ When you press the Turbo remote control button, On turbo ( or Off turbo ( On turbo (Turbo Mode) Off turbo (Normal Mode) : The power brush rotates at normal speed.

  • Page 37: Cleaning The Sensor Window And The Camera

    Maintain tools and filter CLEANING THE SENSOR WINDOW AND THE CAMERA You must turn off the Power Switch at the bottom of the main unit before cleaning the robotic vacuum. Never spray water, thinner, benzene etc. directly onto the main unit of robotic ■...

  • Page 38: Cleaning The Dust Bin And The Filter

    CLEANING THE DUST BIN AND THE FILTER First, empty the dust bin before cleaning it. When separating the dust bin, take care not to spill the dust out of ■ the dust bin. Empty the dust bin in the following cases. ■...

  • Page 39: Cleaning The Power Brush

    Maintain tools and filter Filter Dust Outlet Cover Dust Bin Cover CLEANING THE ROBOTIC VACUUM CLEANER CLEANING ThE POWER BRUSh You must turn off the Power Switch at the bottom of the main unit before cleaning the robotic vacuum. ● Because the dust in the dust bin may come out, separate the dust bin first before cleaning the power CAUTION...
  • Page 40 CLEANING THE ROBOTIC VACUUM CLEANER 3. Lift the power brush up from the main unit. 4. Remove any foreign substances such as long hairs or strings wrapped around the power brush using a cleaning brush or a vacuum cleaner. 5. When cleaning is complete, fix the Power Switch side of the power brush first and then fix the other side of the brush in the same way.

  • Page 41: Cleaning The Edge-Cleaning Side Rotating Brush

    Maintain tools and filter CLEANING THE ROBOTIC VACUUM CLEANER CLEANING ThE EDGE-CLEANING SIDE ROTATING BRUSh You must turn off the Power Switch at the bottom of the main unit before cleaning the robotic vacuum. 1. Check whether the side rotating brush is bent or whether there are any foreign substances stuck on the brush.

  • Page 42: Cleaning The Driving Wheel

    CLEANING THE ROBOTIC VACUUM CLEANER CLEANING ThE DRIVING WhEEL You must turn off the Power Switch at the bottom of the main unit before cleaning the robotic. If the robotic vacuum cleaner suddenly starts to zigzag, there ■ may be foreign substances stuck on the driving wheel. 1.

  • Page 43: Troubleshooting

    Troubleshooting CHECkLIST BEFORE SVC CALLS SYMPTOM CHECkLIST • Is the dust bin assembled? Robotic vacuum • Is the Power Switch cleaner does not turned on? operate at all • Is cleaning mode ( before display panel turned on? cleaning. • Is the battery level flashing only one level and is ‘LO’...
  • Page 44 CHECkLIST BEFORE SVC CALLS SYMPTOM CHECkLIST Robotic vacuum • Check whether the power cleaner cannot plug of the charger is plugged correctly into the outlet. find the charger. • If there are any obstacles within a range of about 1m in front of the charger and about 0.5m range to the left and right of the charger, you should remove the...

  • Page 45: Troubleshooting For Error Codes

    Troubleshooting TROUBLESHOOTING FOR ERROR COdES ERROR COdE CAUSE • Robotic vacuum cleaner is caught, stuck or trapped while navigating. • A foreign substance (string, paper, toy etc.) is caught in power brush. • A foreign substance (string, paper, toy etc.) is caught in the left driving wheel.

  • Page 46: Product Specification

    Product specification 93 mm (height) 355 mm (Length) 355 mm (Width) Main Body 122 mm (height) 275 mm (Width) 161 mm (Length) Charger(Station) 46_ Product specification...
  • Page 47 Product specification CLASSIFICATION Mechanical Specifications Charge power consumption Electrical Specifications Main unit power consumption Cleaning Specifications (on the basis of hard floor) Cleaning method Main unit button type This Vacuum cleaner is approved the following. Electromagnetic Compatibility Directive : 2004/108/EEC Low Voltage Directive : 2006/95/EC ITEM Diameter...
  • Page 48 If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Country SOUTH AFRICA Customer Care Center 0330 SAMSUNG (7267864) 0860 7267864 (SAMSUNG) Web Site www.samsung.com www.samsung.com DJ68-00558Z REV(0.0)

Table of Contents